Automotive Pe Foam Tape With excellent sealing and flame retardant
Product Description
PE foam tape is based on PE foam substrate, coated with high-performance oil-based acrylic adhesive on both sides, with a flexible foam substrate, strong adhesion. Weather resistance, waterproof, solvent resistance, anti-aging, providing uneven surface Very close to the effect. For the electronics industry, furniture industry, metal, automotive interior and exterior decoration, signs, brand names, accessories and so on.
Aerchs offer die cut solutions for PE foam tape.
Structure
PE Film |
Acrylic Pressure Sensitive Adhesive |
PE Foam |
Acrylic Pressure Sensitive Adhesive |
Features
- With excellent sealing, to avoid gas release and atomization.
- Excellent compression deformation, that is, the durability of elasticity, accessories can be obtained long-term shock protection.
- With flame retardant, does not contain harmful toxic substances, will not remain, will not pollute the equipment, the metal is not corrosive.
- Can be used in a variety of temperature range. From negative degrees Celsius to the extent you can use.
- The surface has excellent wettability, easy bonding, easy to make, easy punching.
- Sticky for a long time, stripping large, strong initial adhesion, weather performance! Waterproof, anti-solvent, high temperature, the curved surface has a good obedience.
Application
Widely used in automotive interior parts, door trim, rain gear, signs and other fixed paste. Strong adhesion, shock absorption performance, weather resistance and strong.
- Car, motorcycle signs between the bonding.
- Household appliances fixed.
- Engineering decoration, curtain wall structural bonding fixed.
- Car decoration, car glass, car pedals, seals, waves board, arc, block flow, brake lights plate, the car at the Department of plate bonding fixed.
Data sheet
Item | Black/white foam, Green/red release film |
Peel Type | 180°Peeling |
Test Temperature | 25° |
Test Item Width | 25mm |
Test Speed | 300mm/min |
Adhesive | Excellent acrylic adhesive |
Average Peel Force | 1.82g |
Average Peel Strength | 0.07g/mm |
Minimum Peel Force | 1.61g |
Minimum Peel Strength | -0.06g/mm |
Maximum Peel Force | 1.83g |
Maximum Peel Strength | 0.07g/mm |
Note | Initial Tack 15-17#steel ball,Temperature Resistance:-30℃—120℃,Holding Power around 45days(1kg),ductibility1:2.5 |
Write your message here and send it to us